A brick wall being rebuilt and tuckpointed
▲ 01 / Brick Repair

Brick Repair in Eagan

Free Estimates|Published Price Ranges|Licensed MN BC807211|10-Year Workmanship Warranty
Workmanship Warranty

10 Years

Workmanship warranty, in writing

▲ 02 / Overview
“

A few bricks with their faces gone are no reason for a new wall. A face can flake away after years of wetting and freezing, or a unit can crack through. Bricks in that state are cut out one at a time and new brick is laid into the same openings. That is the scale of brick repair an Eagan front is likeliest to need, when it needs any at all.

A commercial masonry job in progress
▲ 03 / The Centerpiece

The Joints Around a Single Brick

Four joints hold each brick in a wall: the bed joint under it, the bed joint over it, and a head joint at each end. The bricks around it share those joints. Drive a failed unit out with a hammer and chisel, and every blow travels through the shared mortar into its neighbors, which can crack their joints or loosen them in their beds. The repair has then grown before it has started.

That is why we cut. The mortar around the failed unit is typically cut through on all four sides first, so the brick can come free with little force against the surrounding wall. A unit that still will not come away whole can be broken up inside its own opening once its joints are free, and the pieces lifted out. By then it stands apart from its neighbors, so breaking it up does far less to them.

The opening decides whether the new brick holds. Old mortar is cleared from the bed, from the ends of the neighbors and from the underside of the brick above, back to firm material, and loose dust typically goes with it. A new unit set on crumbs of old mortar has nothing solid to bond to. The joint over the new unit is the awkward one, since its mortar has to be worked in from the face rather than spread first.

The replacement is then typically buttered with fresh mortar, slid into the opening and pressed back until its face sits flush with the faces beside it and its top runs level with the course. Any gap left above it is packed full, since a joint left hollow behind its face can let water in at the very spot where the old brick failed. The brick itself is chosen to suit the wall before any cutting begins, a search on our Minnetonka brick repair page describes.

Done this way, a handful of units often takes about a day, as our brick repair page notes, and nothing beyond the failed bricks and their joints has to be taken apart to reach them.

A worker grinding out old mortar on a brick facade
▲ 04 / Process

Cut Free, Cleaned Back and Bedded In

1. Each unit whose face has gone or that has cracked through is noted at the free estimate, wall by wall.

2. Replacement brick is found before anything is cut, chosen for the color, surface, and size of the wall, so that no opening is left standing empty while a match is sought.

3. The failed units are cut free at their joints, typically all four, and lifted out, in pieces if one will not come whole.

4. The opening is cleared of old mortar back to firm material, where needed on every side.

5. The new unit is bedded in fresh mortar and set to its course, and its neighbors, and the joint over it is packed full.

6. Its joints are finished to match the ones beside it, as our Cottage Grove tuckpointing page explains. Exterior mortar work is scheduled for weather mild enough for it to cure.

A clean, finished brick wall around a window
▲ 05 / The City

A Handful of Faces on an Eagan Front

The years from 1970 through 1999 gave Eagan 20,798 of its homes, and the brick an Eagan repair meets is likely brick laid in those decades as a face over a wood frame. That brick has stood outside for far less time than the prewar brick in older parts of the metro, and the wall it makes is unlikely to need more than a few units. When something fails, it tends to stay in one place, such as a brick split where something struck the wall at its base.

Our Eagan page points out that builder brick from those years is easier to match than brick fired a century ago, which helps a small repair sit closer to the surrounding wall. Any chimney on the house belongs to our Eagan chimney repair page.

A commercial brick apartment building exterior
▲ 06 / Pricing

Starting at the Few-Faces Line

One published line covers the repair on this page; the one listed after it belongs to a different job:

Each unit added to the list pushes the first figure up from its starting point. The second line belongs to a wall that has moved, and that is a rebuild rather than a cut-out.

Scope Typical range
Minor brick replacement, a few faces
from about $1,500
Small wall rebuild
about $2,000 to $3,000

Before you call

Every figure on this page depends on square footage and on what we find when we look. They are rough guides to help you decide whether to call, not quotes. The exact number comes after the visit, and the visit is free.

▲ 07 / FAQ

Small Repairs on Eagan Houses

Will you come out to replace just two bricks?+

Yes. Two bricks is the size of job this page is written for, and it is priced on the few-faces line above.

Will the bricks beside the new one be disturbed?+

The method is meant to leave them as they were, since the failed brick is freed by cutting rather than by driving it out. If one of them proves to be failing too, our Eden Prairie brick repair page explains how that is handled.

How many failed bricks turn a replacement into a rebuild?+

No fixed number does. The rule our brick repair page sets turns on whether the wall has moved and how many units have failed.

A new brick patio paver pattern, close up
▲ 08 / Reviews

What Customers Say

What appears below is our live Google feed, not testimonials we picked out, so it shows whatever is genuinely on it.

▲ 09 / Estimate

Faces to Tally From the Drive

What helps on the first call:

  • Walk along the front and count the bricks whose faces have flaked away or that have cracked through. Take one photo of the worst of them, close enough to see its face, and mention your count when you call.
(612) 509-0718 Talk to Sam: (612) 509-0718 · Written estimate, options priced · MN BC807211 No service call fee